The Nouveau Contour Intelligent provides the practitioner with state-of-the-art computerized technology. It is equipped and controlled by an Intel microprocessor “chip”. The Intelligent’s central processing unit offers the most advanced features, which allow for the selection of pre-programmed settings for various procedures, i.e. eyebrow, eyeliner, lip color and medical procedures.
The Intelligent was designed to assist the practitioner, in distinguishing between the varying areas of application, i.e. eyes, lips, eyebrows and medical.
Software installed in the central processing unit, the operating system of the Intelligent, consistently calculates the best needle frequency (speed) needed to achieve optimal pigment retention. Skin structure varies according to the location, because the structure and tolerance of the skin is different for each area of application.
For example: For areola pigmentation, the skin structure is very dense compared to that of an eye lid, which is very thin and supple. When set on “Medical” the Intelligent will provide a more efficient way to deposit pigment in those areas, by automatically increasing the power to the handpiece and by adjusting the needle frequency. In a similar manner, when the practitioner is working on an eyeliner procedure, the control unit of the Intelligent can be set to “Eyes”, which slows down the power to the handpiece and adjusting of needle frequency, therefore depositing pigment more gently.
The Intelligent has more power than any other rotary device. The needle frequency can be adjusted from 50 to 180 punctures per second. This allows the practitioner more flexibility in needle groupings. With the increased power, the practitioner is able to perform every type of cosmetic and medical procedure available.
The Intelligent has a LCD read out, which displays accurate needle frequency, which program you are working on and the needle frequency the Intelligent recommends for the procedure. A timer within the Intelligent, keeps track of actual procedure time and is displayed on the LCD.